Varla Eagle One P-Setting Instruction
Hi Valarscooters, this article covers the basics of
- How to use your Varla Eagle One
- How to set the Speed Unit (kmph/mph)
- How to adjust the Display Brightness
- How to Reset Mileage or the like
It is wise to learn proper skills in advance and be ready for your riding. So start to prepare yourself with loads of confidence to join the off-road, or city scooter riding parade.
Here we go!
CONTENT:
Accessing Settings
There are two buttons on the QS-S4 throttle: Power and Mode.
(QS-S4 throttle)
- Power on your scooter.
- Hold the Mode + Power buttons (3seconds) to access the P-setting menu.
- Press the Mode button to toggle through P-settings.
- Long press the Power button to change the direction of value addition and subtraction, the left display "A" means increasing the value, and the left display "d" means decreasing the value.
- After adjustment, short press the Power button to switch to the next feature and save the previous feature value.
- Press the Power button to select the P-setting to adjust.
- To save settings, allow the LCD display to timeout (8seconds) or long press Mode + Power buttons to exit the menu.
P-Setting Specification:
|
Setting |
Feature |
Notes |
|
P1 |
LCD brightness |
1: low 2: mid 3: high Default: 3 |
|
P2 |
Speedometer units |
0: kph |
|
P3 |
Battery voltage (do not adjust) |
From 24V to 60V |
|
P4 |
Auto-off time |
0: not set |
|
P5 |
Unused |
|
|
P6 |
Wheel diameter (do not adjust) |
Default: 10.0 |
|
P7 |
Motor magnets (do not adjust) |
From 0 to 255 Default: 28 |
|
P8 |
Power level |
1: slowest |
|
P9 |
Start mode |
0: zero start |
|
P10 |
Unused |
|
|
P11 |
Regenerative/Electronic brake strength |
0: off, 1: weak |
|
P12 |
Acceleration |
0: off 1: weak |
|
P13 |
Unused |
|
|
P14 |
Unused |
|
|
P15 |
Automatic scooter voltage shut-down (do not adjust) |
From 37.0 to 47.0 Default: 42.0 |
|
P16 |
Lifetime odometer reset |
Long-press Mode button to reset to 0 |
|
P17 |
Cruise control |
0: off |
|
P18 |
Unused |
|
|
P19 |
Unused |
|
|
P20 |
Communication protocol (can not adjust) |
Default: 4 |
Fault Codes:
|
Fault Code |
Feature |
Fault Code |
Feature |
|
2 |
Brake |
10 |
Faulty comms between controller and LCD |
|
4 |
6 km/h cruise |
11 |
Faulty comms between controller and LCD |
|
6 |
Battery under voltage |
12 |
BMS failure |
|
7 |
Motor faulty |
13 |
Headlight failure |
|
9 |
Controller faulty |
|
|
Varla Eagle One is designed as an off-road electric scooter, suitable for the outdoor off-road adventure. Let’s explore more together!
Notes on Varla Eagle One Usage.
1
*Turn the key to the right and press the switch button for 3 seconds to turn on the LCD display.
*When the power is on, press the “Mode” button to change the gear from 1 to 3.
* Long press the “Mode” button, the front light will be on.
2
Pull the brake and the front & rear braking lights will light up.
3
Press the switch to change single or dual drive.
4
When you charge the scooter, connect the cable and the charging hole first, then plug in the socket power. Varla Eagle One has 2 charging ports, you can use them at the same time.
Before your first ride, please read the owner’s manual in advance. For it contains important details related to safety and maintenance.
It will help you a lot !
After you're ready, just go out there, have fun and find your own deck-style.
Let's kick up some dust with Varla Scooter together.
